Flux Free Corrosion Free Ultrasonic Soldering Iron Metal Soldering on Ceramic
Designed and built in the China the Solsonic Ultrasonic Soldering Iron offers the advantage of flux-less soldering of similar and dissimilar metals and materials in common use as well as previously difficult to solder materials such as aluminium, ceramics, glass and silicon's used in microelectronic applications .
The 60 kHz standard ultrasonic generator is housed in a strong metal case with a carrying handle for ease of portability. The ultrasonic generator is matched to the ultrasonic transducer in the iron handle to ensure optimum performance at all activity levels. The unit automatically maintains the set Amplitude under normal changing load conditions.
The new model of the ultrasonic soldering iron comes complete with a newly designed ergonomic, lightweight handle, which guarantee that there is a minimum of strain on the operator during the soldering process.
The ultrasonic soldering iron incorporates a powerful heater, rated at 100W, and a digital temperature controller which allows the user to adjust the soldering tip temperature and provides control from 50°C up to 400°C ±2°C.
The ultrasonic generator has 9 levels of ultrasonic activity, selected by push buttons, plus a function that allows the soldering iron to be used as a conventional soldering iron if required. The ultrasonic power is applied to the iron as needed by operating the provided footswitch or , alternate, the power can be turned on and off using the button on the front of the unit.
An ultrasonic transducer is built into the soldering iron handle.There is a safety system in place to ensure that if the air pressure has dropped and has stopped cooling the transducer the Unit automatically turns off to prevent frequency drift and damage to the transducer.
| Model No. |
RPS-SI60 |
| Ultrasonic Frequency |
60Khz |
| Maximum Output |
100 Watt |
| Temperature Range |
150 ~ 400 °C |
| Power Supply |
220V / 50-60 Hz |
| Ultrasonic Generator |
Size |
250(W) x 310(L) x 135(H) mm |
| Weight |
5 Kg |
| Feature |
Ultrasonic Amplitude Adjustable |
| Iron Handle Length & Diameter |
190mm / Ø20 |
| Avail Soldering Matrial |
ITO Glass, AL, Mo, Cu etc., |
Characteristics
- Minimal surface pre-treatment required.
- No post cleaning of flux residues.
- No voids in joints due to ultrasonic activity.
- No wicking of solder into joints and wires.
- Stronger non-porous bonds as solder is forced into the surface layer of the material.
- The unit operates worldwide due to dual voltage selection.
Application:
- Small scale production.
- For use in laboratory conditions, while preparing data before mass production and for inspection purposes.
- Soldering electrodes for display goods.
- Soldering electrodes for solar cells.
- Soldering electrodes on highly conductive
- ceramic substrates.Bonding electronic parts.
- EL lighting.
Product Tags:
|
|
Corrosion Free Ultrasonic Soldering Equipment Iron Metal Soldering On Ceramic Images
|
